Akuvox SP-R50P User Manual

36
4.6.3.PPPoE Mode
1. In the LAN Port interface, press the Up or Down key on the phone keyboard to
select PPPoE, then press the OK key on the phone keyboard or the Enter softkey to
enter PPPoE Setting interface.
2. Press the Up or Down key on the phone keyboard to enter User Name and
Password:
3. Input User Name, Password;
4.6.4.Configure VLAN
In the Network Settings interface, press the Up or Down key on the phone keyboard
to select VLAN Port, press the OK key on the phone keyboard or the Enter softkey to
enter LAN Port configuration interface.
LAN Port
1. In the LAN Port interface, press the Up or Down key on the phone keyboard to
select LAN Port, press the OK key on the phone keyboard or the Enter softkey to
enter LAN Port.
2. In the LAN Port interface, press the Up or Down key on the phone keyboard to
configure the functionality Enable, VID, Priority.
3. When the VID is empty，press the OK key on the phone keyboard or the Save
softkey to save.
4. Save it after configuration.
PC Port
1. In the PC Port interface, press the Up or Down key on the phone keyboard to
select LAN Port, press the OK key on the phone keyboard or the Enter softkey to
enter PC Port.

Akuvox SP-R50P Specifications

General

Brand	Akuvox
Model	SP-R50P
Category	IP Phone
Language	English