Akuvox SP-R50P User Manual

39
2. Input the IP address in the browser’s address bar and then press the Enter key
3. If successfully connected to IP phone, it will prompt a login page. In this page,
please input the username and password accordingly. By default, username and
password are as below:
User Name: admin
Password: admin
4. After successfully log in, it will automatically locate to Status->Basic Page as
shown below:
Sections Description
Product Information To display the device’s information such as Model name,
MAC address (IP device’s physical address), Firmware version
and Hardware version.
Network Information To display the device’s Networking status(LAN Port),such as
Port Type(which could be DHCP/Static/PPPoE),
Link Status, IP Address, Subnet Mask, Gateway, Primary DNS
server, Secondary DNS server, and Primary NTP server
and Secondary NTP server(NTP server is used
to synchronize time from INTERNET automatically).

Akuvox SP-R50P Specifications

General

Brand	Akuvox
Model	SP-R50P
Category	IP Phone
Language	English