Trusted IP: To configure allowed SNMP server address,it
could be an IP address or any valid URL domain name.
Note: SNMP(Simple Network Management Protocols) is
Internet-standard protocol for managing devices on IP
networks.
VLAN To display and configure VLAN settings.
LAN Port/PC Port:You can configure VLAN setting for
Active:To enable or disable VLAN feature for designated
Vid:To configure VLAN id for designated port.
Priority:To select VLAN priority for designated port.
Note: Please consult your administrator for specific VLAN
settings in your networking environment.
QoS To display and configure QoS settings.
SIP QoS:To configure QoS value for all SIP message.
Voice QoS:To configure QoS value for all audio
stream(RTP streams).
TR069 To display and configure TR069 settings.
Active: To enable or disable TR069 feature.
Version: To select supported TR069 version (version 1.0
ACS/CPE: ACS is short for Auto configuration servers as
server side, CPE is short for Customer-premise
equipment as client side devices.
URL: To configure URL address for ACS or CPE.
User name: To configure username for ACS or CPE.
Password: To configure Password for ACS or CPE.
Periodic Inform: To enable periodically inform.
Periodic Interval: To configure interval for periodic
inform.
Note: TR-069(Technical Report 069) is a technical
specification entitled CPE WAN Management Protocol
(CWMP).It defines an application layer protocol for remote
management of end-user devices.
VPN To display and configure VPN settings.
Active: To enable or disable VPN feature.
Upload: To upload VPN client configuration file which is
used to connect to VPN server.
Note: For now, IP phone can only support OpenVPN.
To Next Page
Loading...
Need help?
General
