35
EURO-OVERRUN DEVICE FITTED WITH
AK160 OR AK300 COUPLING HEAD
Connect trailer electric plug controlling lights and indicators
etc. into towing vehicle socket.
Wind the jockey wheel up fully and clamp securely in position,
ensuring that it does not foul the brake rod or breakaway
cable. Remove wheel chocks if tted and stow safely.
CAUTION
Failure to comply with this could result in the brakes overheating.
EURO HANDBRAKE
Ensure the handbrake is fully applied to ensure that the wheel
brakes will be automatically re-applied should the vehicle start
to roll backwards.
CAUTION
If the handbrake is not fully applied as detailed above, there is
a danger that the caravan could roll backwards.
TO RELEASE
Press the handbrake down until it is parallel with the fairing
cover to ensure that the brake is correctly disengaged.
OVERRUN DEVICES
SPARE PARTS
Spare parts are safety critical parts! For this reason when tting
spare parts in our products we recommend the use of original
AL-KO parts or those parts that we have explicitly approved. The
reliability, safety and suitability of parts designed especially for our
products, has been determined using a special test procedure. In
spite of constantly monitoring the market we are unable to assess
or vouch for other products.
If repair work or servicing is required, AL-KO have a large network
of AL-KO service stations throughout Europe. To establish the
correct spare parts required you should always quote the model
and type of overrun device in question along with the ETI No.
which is stamped into the overrun device housing. The ETI
number for the Euro Overrun can be found on the handbrake lever.
To Next Page
Loading...