EasyManua.ls Logo

AL-KO CARAVAN CHASSIS - Al-Ko Secure

AL-KO CARAVAN CHASSIS
47 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
38
ACCESSORIES
AL-KO SECURE
AL-KO Secure is the Sold Secure Diamond Standard Wheel
Lock for caravans with alloy wheels. Years of research and
development have been undertaken to ensure that AL-KO
Secure can withstand the maximum number of attack
methods, and even deter thieves from approaching your
caravan in the rst place.
Most caravans have the AL-KO Receiver tted to the wheel
drum as standard and some manufacturers include the
wheel lock kit with the caravan at the time of purchase. To
increase the security provided by the wheel lock, the lozenge
is designed specically to suit the alloy aperture and is
therefore wheel rim specic.
For more information about
the AL-KO Secure Wheel
Lock and to identify
which wheel lock kit
you need for your
caravan, please visit
our website at
www.al-ko.co.uk.
FITTING AL-KO SECURE
1. We recommend the use of a Side Lift Jack for easier tting
and removal of AL-KO Secure. Lift the caravan slightly to allow
the wheel to rotate freely. Align the wheel so that the receiver
can be seen in the centre of the rim opening. Do not use the
rim opening in which the tyre valve is tted.
2. Unscrew the Plastic Cap from the receiver and store in the
Lock Kit Box. (When AL-KO Secure is not in use, always screw
the Plastic Cap in place).
3. Insert the Locking Bolt into the Rim Specic Insert.
4. Insert the Locking Bolt Socket Key.
5. Line up the Locking Bolts and assembly with the receiver.
6. HAND TIGHTEN the Locking Wheel Bolt using the Wheel
Spanner provided as shown, or a Torque Wrench.
7. Remove the Locking Bolt Socket Key.
8. Insert Barrel Lock.
9. Push the key fully into the lock and turn to operate the lock
and then remove the key.
10. The AL-KO Secure is now tted.

Table of Contents