What to do if AL-KO Robolinho 500E calibration signal is weak?
A weak signal during calibration of your AL-KO Lawn Mower can be caused by: * A loop signal that is too weak. * No loop signal. * A faulty boundary cable. To address this: * Place the appliance at the prescribed calibrating position, aligned precisely at right angles. * Check the power source of the base station by disconnecting and reconnecting the power supply.
What to do if AL-KO Robolinho 500E Lawn Mower Blocked WR?
If your AL-KO Lawn Mower displays 'Blocked WR', it means the right wheel motor is blocked. To fix this, remove the blockage.
What to do if AL-KO Robolinho 500E Lawn Mower lift sensor triggered?
If the lift sensor on your AL-KO Lawn Mower has triggered, it means the appliance cover has been deflected upwards, either by lifting or by an obstacle. To solve this, remove the obstacle.
What to do if AL-KO Robolinho 500E calibration shows collision?
If your AL-KO Lawn Mower shows a collision during calibration, it means the appliance has bumped into an obstacle. To fix this, remove the obstacle.
What to do if AL-KO Robolinho 500E Lawn Mower battery is overheating?
If your AL-KO Lawn Mower's battery is overheating (more than 60 °C), and discharging is not possible, switch off the appliance and let the rechargeable battery cool down.
General| Brand | AL-KO |
|---|---|
| Model | Robolinho 500E |
| Category | Lawn Mower |
| Language | English |
Defines warning symbols and keywords used in the manual for safety.
Lists all components included in the delivery package for verification.
Describes the main robotic lawn mower unit and its key features.
Explains the meaning of various safety and operational symbols on the mower.
Details the buttons, controls, and display screen of the lawn mower.
Outlines the hierarchical structure of the appliance's menu system.
Explains the base station setup, charging contacts, and battery charging process.
Describes how the mower operates, including mowing and charging cycles.
Covers connecting the mower to smart home systems via apps like AL-KO inTOUCH.
Defines the proper application and prohibited uses of the appliance.
Details protective devices, PIN input, and various sensors for safe operation.
Covers operator responsibilities, safety for persons/animals, and electrical safety.
Covers unpacking, planning mowing areas, and preparing the lawn.
Details the process of placing and fixing the base station correctly.
Explains how to connect, route, and manage the boundary cable, including obstacles.
Covers connecting the base station to power and verifying connections.
Instructions for fully charging the battery before first use.
Guides through setting language, PIN, date, and time.
Explains how to manually adjust the blade cutting height.
Details the process for calibrating the mower to the boundary cable.
How to manually start, stop, and cancel mowing operations.
Procedure for mowing a separate or secondary lawn area.
Adjusting general preferences and enabling/disabling button tones.
Configuring daily mowing schedules, times, and program types.
Setting up edge mowing and managing the inTOUCH app connection.
Covers display contrast, setting lock, recalibration, factory reset, and data display.
Instructions for cleaning the mower, base station, and contact surfaces.
Outlines routine checks and how to replace cutting blades.
Guidelines for safely moving the automatic lawn mower.
Procedures for storing the mower, base station, and boundary cable.
Regulations and methods for disposing of the appliance and batteries.
Information on warranty, repairs, and contacting customer service.
Guides on identifying and resolving common appliance and handling issues.
Lists error codes and their corresponding causes and remedies.
Details the terms and conditions of the product warranty.
States compliance with EU directives and standards.
To Next Page