What to do if my AL-KO Robolinho 520 W shows 'Cal: no loop'?
If your AL-KO Lawn Mower displays 'Cal: no loop' during calibration, it means the appliance cannot find the boundary cable. Check the power supply to the base station by disconnecting and reconnecting the power supply unit. Place the appliance in the prescribed calibrating position, aligned precisely at right angles, ensuring the appliance can drive over the boundary cable.
General| Max Area | 500 m² |
|---|---|
| Battery Voltage | 20 V |
| Battery Capacity | 2.5 Ah |
| Cutting Height | 25-55 mm |
| Maximum Gradient | 45% |
| Battery Type | Lithium-Ion |
| Power Source | Battery |
| Cutting Height Adjustment | Central |
| Grass Collection Volume | Not applicable |
Details the automatic lawn mower unit and its features.
Explains how the appliance operates on the grass surface and during mowing/charging.
Details the WiFi connectivity and the smart garden app for remote control.
Details safety sensors, protective devices, and input requirements like PIN/PUK.
Provides guidelines for operator, PPE, persons, animals, appliance, and electrical safety.
Guidance on selecting the base station location and defining mowing areas.
Instructions on preparing the lawn surface before setting up the system.
Detailed steps for correctly installing the base station on the ground.
Procedures for connecting, routing, excluding obstacles, creating loops, and troubleshooting boundary cable installation.
Instructions for connecting the base station to the electrical power source.
Instructions for the initial charging of the appliance's battery.
Guide to configuring initial settings like language, PIN, date, and time.
Procedure for performing the initial calibration movement for optimal operation.
Details on setting up mowing programs, general settings, start points, and times.
Provides a table to identify and resolve common appliance issues and handling faults.
Lists specific error codes and their corresponding causes and remedies for troubleshooting.
To Next Page