Alba 8A - Hooking up the Load; Fig. 2-8 - Fastening the Traction and Lifting Apparatus

8A-16A-32A INSTALLATION Page 12 of 28
8A-16A-32A Rev.00-EN  (+34) 944 71 16 00  (+34) 944 53 17 54  export@alba.es www.alba.es
CORRECT NEVER
Fig. 2-8 - Fastening the traction and lifting apparatus
2.3 Hooking up the load
The cable supplied with the Apparatus is equipped with a coupling with a safety lock at one
end.
WARNING:
Do not use the cable exiting the traction apparatus to fasten o
r
sling any type of device.
WARNING:
Do not use the cable exiting the traction apparatus to attach it to
another traction device.
WARNING:
Never fasten the Apparatus by leaning or clamping the casing, as
this could deform it and cause the Apparatus to malfunction.