8A-16A-32A MAINTENANCE Page 20 of 28
8A-16A-32A Rev.00-EN (+34) 944 71 16 00 (+34) 944 53 17 54 export@alba.es www.alba.es
5 MAINTENANCE
The Traction Apparatus should be inspected on a regular basis and particularly prior to using
it.
The state of the Traction Apparatus should be checked regularly for defects, dents, etc,
which might cause it to malfunction. Broken parts should be replaced with new originals
when necessary.
NEVER remove a part and continue to use the Traction Apparatus without replacing it.
Incorrect use, the use of non-original spare parts and unauthorised modifications or repairs
will exempt the manufacturer from all liability and guarantees.
5.1 Maintenance of the Lifting Apparatus
Oiling the Lifting Apparatus after using it for the first time. This should be done frequently, in
particular after lengthy use or when the lowering operation has become stiff. Before oiling the
equipment we recommend cleaning the apparatus when necessary. Use SAE 90 or SAE 140
oil.
There is no general rule on the frequency at which inspections should be conducted. Practice
and the mode of use will dictate the periodicity of such inspections.
If the Lifting Apparatus is to be left idle for some time, it should be well greased as a means
of protecting it against corrosion.
OIL
WARNING:
Maintenance may only be conducted by persons authorised by
the manufacturer.
To Next Page
Loading...