Alba 8A - Fig. 3-1 - Use of Pulleys

8A-16A-32A USE Page 16 of 28
8A-16A-32A Rev.00-EN  (+34) 944 71 16 00  (+34) 944 53 17 54  export@alba.es www.alba.es
CORRECT NEVER
Fig. 3-1 - Use of pulleys
After having followed the instructions and there is no sign of any hazard which might arise
during the normal use of the Apparatus, it may be used as described below:
 With the lever in forward or reverse gear, as applicable, the equipment will move
back-and-forth in a longitudinal direction.
 The maximum range of this back-and-forth movement is that of the Apparatus itself.
 The path of the lever will depend on the intent of the user, never beyond the limit of
the Apparatus.
WARNING:
In order to guarantee the equipment performs well, never engage
the two gears (forward and reverse) at the same time.
WARNING:
Do not force or obstruct the normal path of the levers.
WARNING:
Oiling of the Apparatus after using it for the first time (See the
maintenance section).
WARNING:
The Apparatus should be oiled in the event the lever becomes stif
f
in reverse or down gear or after lengthy use (See the maintenance
section).