Alba 8A - Fig. 5-1 - How to Measure the Cable

8A-16A-32A MAINTENANCE Page 22 of 28
8A-16A-32A Rev.00-EN  (+34) 944 71 16 00  (+34) 944 53 17 54  export@alba.es www.alba.es
Fig. 5-1 - How to measure the cable
A simple visual inspection may reveal defects such as:
 Kinks and twists caused by unrolling the Cable in an incorrect manner.
 Worn and even broken wires; we recommend replacing the Cable when there are
12 broken wires in a 25 cm section.
 Loose or open wires.
 Damage caused by heat.
 External and visible oxidation.
 Internal and hidden oxidation.
WARNING:
The safety Cable, although not normally used, should be
inspected on a regular basis.
CORRECT INCORRECT