Getting to know your telephone
6
redial
end
Receiver
Audio keys
Function keys
END key:
to terminate a call.
Handsfree/Speaker Key:
to make or answer a call without lifting the receiver (Alcatel-Lucent IP Touch 4008/4018 Pho-
ne).
• lit in handsfree mode or headset mode (short press).
• flashing in speaker mode (long press).
Intercom/Mute key:
• During a call: press this key so that your party cannot hear you.
• Terminal idle: press this key so that you can automatically answer a call without lifting the receiver
(Alcatel-Lucent IP Touch 4008/4018 Phone).
To adjust the speaker or receiver volume up or down
Messaging key to access various mail services
If the key flashes, a new voice message or a new text message has been received.
'Redial' key :
• To access the 'Redial' feature (short press)
• Call back on the last 10 number dialled (long press).
end
redial
Navigation
Up-down navigator:
used to navigate around the home page, through the menus or in a text zone
when entering characters.
The home page consists of:
• Information on the status of the set (set locked, call forward, etc.)
• Date and time
• Set programming and configuration features
Functions accessible (set in idle position): Features accessible on call:
Identifying the terminal you are on . Placing a call on hold (HOLD).
Call back one of the last 10 numbers dialed . Sending DTMF signals.
Lock / unlock your telephone .
Store the number in the personal phone
book.
Programming an appointment reminder. Call a second party using call by name.
Forward your calls to another number. (im-
mediate forwarding, forward to voice mail,
forward to bleeper).
Transfer a call to the voice mailbox of an ab-
sent party.
Configure the set (personal assistant, display,
ring tone, voice mail, etc.) .
Using dial by name.
.
Other features can be accessed depending on the configuration of the system.
OK key:
used to validate your choices and options while programming or configuring.
Back/Exit key:
to return to previous menu (short press) or return to first screen (long press). You can also use this key to correct
a character you entered.
WhoAmI
Lock
Settings
WhoAmI
Hold
Rediallist
¤DTMF
Lock
»Directory
Appointment
Dialbyname
Forward
Transfer>VMU
Settings
Dialbyname
OK
Feature keys and programmable keys
Guide key:
Use to obtain information on the pre-programmed keys or to access the set programming or configuration.
Phone book key:
Phone book key to access your personal phone book (short press) or to make a call by name (long press or press
twice).
Pre-programmed feature keys and programmable key
Lit when the feature associated with the key is activated.
The 6-key block consists of:
two line keys,
one 'immediate forwarding or cancel call-forward' key,
one 'conference' key,
one 'transfer' key,
one speed dial key to programme.
Alphanumeric keypad
To Next Page
Loading...
