Alcatel-Lucent 7330 - Page 210

5 — VoIP overview
5-10 March 2011 Alcatel-Lucent 7330/7302 ISAM FTTN R04.02.42a
ONT Product Information Guide Edition 01 3FE 54199 AAAA TCZZA
Table 5-2 SIP service features
Service Description SIP
mode 1
SIP
mode 2
OMCIv2
Basic call Basic calling functions Y Y Some parameter such as
contact_uri must be
configured on the ONT
using XML.
Emergency number (911)
(1)
Basic 911 support
Enhanced 911 support
Denial of feature use
Emergency ringback
Forced hold
Y
—
—
—
—
Y
Y
Y
Y
Y
Fully configurable
Call forwarding status
indications
(1)
Splash ring when a call is actually
forwarded
Stutter dial tone while call forwarding is
active
Implicit call forward status indicators for
FS 5000 softswitch cannot be configured
using TL1.
—
Y
Y
Y
Reminder ring and
cfsi_event_uri must be
configured using XML.
Call hold (ANSI)
(1)
Basic hold (flash hook supported)
Remote hold/network hold
Y
—
Y
Y
Fully configurable
Call hold (ETSI) Basic hold (flash hook supported)
Remote hold/network hold
(1)
Y
—
Y
Y
ETSI mode cannot be
configured using TL1.
Reverse polarity (ETSI)
(1)
— — Y ETSI mode cannot be
configured using TL1.
Tone of death (ETSI)
(1)
— — Y ETSI mode cannot be
configured using TL1.
HF using INVITE
(1)
For FS 5000 softswitch interoperability Y — thin_client_HF_method is
only supported using XML.
Call transfer
Call park
(1)
Blind and consultative call transfer
Call transfer attended and unattended
Y
—
Y
Y
Fully configurable
Call waiting (ANSI)
(1)
Basic call waiting
Delivery of calling number and name
Cancel call waiting
Activate/deactivate/interrogate call
waiting
Y
Y
Y
Y
Y
Y
Y
Y
Fully configurable
Call waiting (ETSI) Basic call waiting
Delivery of calling number and name
Cancel call waiting
(1)
Activate/deactivate/interrogate call
waiting
(1)
Y
Y
Y
Y
Y
Y
Y
Y
ETSI mode cannot be
configured using TL1.
Fax service T.38
Pass through
Y
Y
Y
Y
Fully configurable
Caller ID
(1)
Delivery of calling party number and
name
Caller ID
Y
Y
Y
Y
Basic caller ID is
configurable using TL1.
Details such as ID format,
URI preference, and
country code stripping
must be configured using
XML
(1 of 3)