Alcatel-Lucent 7330 - Page 211

5 — VoIP overview
Alcatel-Lucent 7330/7302 ISAM FTTN R04.02.42a March 2011 5-11
3FE 54199 AAAA TCZZA Edition 01 ONT Product Information Guide
DTMF RFC2833
Inband
INFO based
(1)
—
Y
—
Y
—
Y
Symmetric feature only
supported using XML. INFO
based only supported using
XML.
Codec commit re-INVITE
(1)
For softswitches that do not support
extra invite messages generated by the
ONT due to use of multiple codecs
Y Y peer_codec_commit only
configured using XML.
Session timer — Y Y Session timer default
values are used when
configured using TL1.
Packetization interval — Y Y default_packetization_int
erval is only configurable
using XML.
Automatic callback
(1)
— Y Y Fully configurable
Conference calling (ANSI)
(1)
Call parties are joined together at a
softswitch server
Call parties in a 3-way conference are
joined together at an ONT
6-way conference
Y
—
—
—
Y
Y
Fully configurable
Conference calling (ETSI) Call parties in a 3-way conference are
joined together at an ONT
Y — ETSI mode cannot be
configured using TL1.
Direct connect (Hot Line) Configurable directory number is called
automatically when a subscriber goes off
hook
Y Y Fully configurable
Direct connect (Warm
Line)
(1)
Configurable directory number is called
automatically when a subscriber goes off
hook and does not dial before the initial
digit timeout period.
Y Y Fully configurable
Distinctive ringing Outside call alerting
Priority call
Screening list
Teen line
Y
Y
Y
Y
Y
Y
Y
Y
Fully configurable
Home intercom
(1)
Allows conversation between two phones
on the same physical POTS line as though
in a normal call, but without establishing
a network connection
— Y Only one service code is
supported when
configured using TL1.
Message waiting
indication (MWI)
(1)
Audible and visual MWI when a subscriber
has voice mail message waiting,
including:
Reminder ring
Stutter dial tone
Visual MWI
Y
Y
Y
Y
Y
Y
Specific feature details
such as
vmwi_refresh_interval,
vmwi_abbreviated_ring,
mwi_reminder_burst, and
mwi_reminder_interval
must be configured using
XML.
Outbound call dialing
(1)
Part of basic call Y Y Fully configurable
Bridged lines
(1)
Two or more lines sharing the same
directory number
—Y
Call pickup with Barge-in
(1)
Allows a third party to join a two-way
call
—Y
Service Description SIP
mode 1
SIP
mode 2
OMCIv2
(2 of 3)