5 — VoIP overview
Alcatel-Lucent 7330/7302 ISAM FTTN R04.02.42a March 2011 5-45
3FE 54199 AAAA TCZZA Edition 01 ONT Product Information Guide
obsolete_stale This value controls the behavior of
the ONT with respect to nonce
expiration and re-registration or
dialog refreshes.
If this value is set to “true” then if
the ONT receives an
authentication reject (401 or 407
error) that contains a new nonce
value, but no stale-flag, the ONT
should behave as if a stale=true
was present and send the refresh
with the new nonce value
Note that the ONT will still
properly handle the stale-flag, if
present. If the obsolete_stale
value is set to “false”, then if the
stale-flag is not present in the
401/407 message, RFC2716
compliant behavior will be
followed, and the registration or
dialog that was being refreshed
will be terminated. The default
value is “false” when using FTP
download and “true” when using
iConfig to configure SIP.
YYPackage
A, B, H
only
No, value is
derived
from
FTP/default
line profile.
N/A
thin_client_HF_met
hod
If the voice client is in thin mode
(SIP mode 1), the flash hook
processing behavior is controlled
by this value.
If the value is set to ‘info’, the
hook flash indication is sent using
an INFO message to the softswitch.
If the value is set to ‘invite’, the
ONT passes the HF event to the
softswitch using an INVITE message
with the request-URI set to the
value of the
thin_client_HF_request_URI value.
YNPackage
A, B, H
only
No, value is
derived
from
FTP/default
line profile.
N/A
thin_client_HF_requ
est_
URI
This value contains the string value
to be used as the user portion of
the INVITE request when the ONT is
in thin client (SIP mode 1) and the
thin_client_HF_method is set to
‘invite’. The default is
‘LucentTISPAN-FlashRequest’.
YNPackage
A, B, H
only
No, value is
derived
from
FTP/default
line profile.
N/A
Parameter Description Mode
1
Mode
2
Device OMCIv2
support?
TL1 or CLI
parameters
(13 of 23)
To Next Page
Loading...
