Alcatel-Lucent 7330 - Page 278

6 — ONT management using an ONT interface
6-10 March 2011 Alcatel-Lucent 7330/7302 ISAM FTTN R04.02.42a
ONT Product Information Guide Edition 01 3FE 54199 AAAA TCZZA
Table 6-4 Tasks and procedures
Task Procedure using
HTTP interface
Procedure using
CLI interface
Procedure using
Package C ONT
HTTP interface
Procedure using
Package C ONT
CLI interface
Procedure using
butt set
Accessing or
disconnecting
from the HTTP
or a CLI
interface
— To access the
CLI interface
using a craft
port
— To access the
CLI interface
using a craft
port
—
To access the
HTTP interface
using the first
Ethernet port
To access the
CLI interface
using the first
Ethernet port
— To access the
CLI interface
using an
Ethernet port
To disconnect
from the HTTP
interface
To disconnect
from the CLI
interface
— To disconnect
from the CLI
interface
Retrieving
product
information for
an ONT
To retrieve
product
information for
an ONT
To retrieve
product
information for
an ONT
To retrieve
product
information for
an ONT
—
Checking ONT
status
To check ONT
status
To check ONT
status
—
Retrieving
uptime of an
ONT
To view the
uptime of an
ONT
To view the
uptime of an
ONT
—
Retrieving RSSI To view RSSI To view RSSI —
Checking status
of LEDs
To check the
status of LEDs
To check the
status of LEDs
—
Checking
ranging state of
an ONT
To check the
ranging state of
an ONT
To check the
ranging state of
an ONT
—
Monitoring
software
download to an
ONT
To check status
of software
download
To check the
status of
software
download
—
Rebooting an
ONT
To reboot an
ONT
To reboot an
ONT
To reboot a
Package C ONT
To reboot a
Package C ONT
Tracing OMCI
and protocol
traffic
To enable
tracing
To trace in real
time or logging
mode
To perform an
OMCI trace for a
Package C ONT
—
To disable
tracing
To specify
logging option
To perform a
Protocol trace
for a Package C
ONT
To retrieve a
trace log
To disable
tracing in
logging mode
—
— To copy a trace
log to a TFTP
server
—
(1 of 2)