6 — ONT management using an ONT interface
6-42 March 2011 Alcatel-Lucent 7330/7302 ISAM FTTN R04.02.42a
ONT Product Information Guide Edition 01 3FE 54199 AAAA TCZZA
4 Click on one of the following buttons to reboot the ONT:
• Force reset—to reboot the ONT immediately regardless of the download state
of the ONT
• Graceful reset—to reboot after an ongoing software download is complete
The reset ONT dialog box opens, as shown in Figure 6-24.
Figure 6-24 Reset ONT dialog box
5 Click on the Reset button to reboot the ONT.
The status bar appears a message after the ONT is rebooted successfully.
6 STOP. This procedure is complete.
Procedures using CLI interface
The following procedure provides the steps to reboot an ONT using the CLI
interface.
Procedure 6-26 To reboot an ONT
1 Choose option 8, More options, from the Main menu. The Secondary menu
appears.
2 Choose option 7, Reboot an ONT, from the secondary menu.
The current state of the download appears. For example:
Software Download: State = Complete
press enter key to continue...
where the download states are described in Table 6-9
3 Press ↵ to continue.
4 Choose option 11, Return to main menu, to return to main menu.
5 STOP. This procedure is complete.
Procedures using HTTP interface for Package C ONT
The following procedure provides the steps to reboot an ONT using the HTTP
interface for Package C ONTs.
To Next Page
Loading...
