6 — ONT management using an ONT interface
Alcatel-Lucent 7330/7302 ISAM FTTN R04.02.42a March 2011 6-43
3FE 54199 AAAA TCZZA Edition 01 ONT Product Information Guide
Procedure 6-27 To reboot a Package C ONT
1 Select the Reboot option from the ONT Admin section of the navigation tree in the
GPON ONT window.
The Reboot window appears; see Figure 6-25.
Figure 6-25 Reboot window
2 Click Reset to reboot the system.
3 STOP. This procedure is complete.
Procedures using CLI interface for Package C ONTs
The following procedure provides the steps to reboot an ONT using the CLI interface
provided with Package C ONTs.
Procedure 6-28 To reboot a Package C ONT
1 Type R or r for Reboot from the SLID menu at any time during the session.
2 STOP. This procedure is complete.
Procedures using butt set
Not applicable.
6.13 Tracing OMCI and protocol traffic
Tracing is a logging of traffic to detect or resolve networking problems. Trace logs
are normally provided to support staff for troubleshooting. You can trace OMCI,
ARP, DHCP, or IGMP protocol traffic.
To Next Page
Loading...
