1.10 Permanent features keys
They are located just above the loudspeaker.
• Mute and interphony key.
During a call, press this key to stop your contact from hearing you.
When idle, press this key to switch the phone to interphony mode.
When you receive a call, the phone hooks off automatically and you
go straight into hands-free mode. When activated, this key is lit blue.
Interphony can be disabled by the administrator.
• Turn down the volume (ringing or call state).
• Decrease the brightness (idle state).
• Decrease the contrast (idle state).
• Turn up the volume (ringing or call state).
• Increase the brightness (idle state).
• Increase the contrast (idle state).
• Pressing this key answers an incoming call in hands-free mode
(when activated, the key is lit blue). When a call is in progress,
pressing this key switches from hands-free mode to headset or
handset mode. A long press activates the loudspeaker when a call
is in progress via the handset or headset.
• Programmable keys (F1 and F2 keys).Lit when the function
associated with the key is activated. A service or a direct call can be
associated to these keys.
• Redial key: to access the 'Redial' feature.
o Last number redial (short press).
o Call back one of the last 8 numbers dialed (long press).
• Quick access to user local menu (long press).
• Used to obtain information on functions of the 'menu' page and to
program key of the 'perso' page (short press).
Messaging key to access the messaging portal (call log, voice
messages and text messages).
This key flashes blue when there is a new event such as a new voice
message, a new instant message or a new event in the call log. The key
remains lit until all events are acknowledged or deleted.
To Next Page
Loading...
