1.13.2 Install more than one add-on module
It is possible to connect up to three add-on modules (Premium Smart Display 14 keys, Premium Add-on
40 keys). To attach another add-on, affix and connect the new add-on to the one that is already
connected:
• The first add-on is connected to the deskphone.
• Plug the provided cord of the new add-on into the dedicated
socket behind the connected add-on ( ).
• Plug the other end of the cord into the dedicated socket
behind the new add-on ( ).
• Restart the deskphone (unplug and plug in the power jack if
you are using an external power adapter or the Ethernet
connector – LAN).
1.13.3 Attach the add-on with the clip
You can also order this clip separately for each of the two add-on modules. You can attach the base (set
and add-on module) with the add-on clip provided with Premium Add-on module 40 keys and Premium
Smart Add-on module 14 keys.
Premium Smart Add-on
Remove the protection on the
add-on clip
Place the clip in the correct
position under the base of the
phone, as shown in the image
Place the add-on onto the clip, as
shown in the image
Remove the protection on the
add-on clip
Place the clip in the correct
position under the base of the
phone, as shown in the image
Place the add-on onto the clip,
as shown in the image
Use the same procedure to attach an add-on to another add-on.
You can attach one or more add-ons to your phone. To attach another add-on, affix and connect the new
add-on to the one that is already connected.
To Next Page
Loading...
