7.10 Programming keys for call numbers and functions (Perso page/F1 and F2
keys/add-on keys)
123<>abc: If your set is not provided with a magnetic keyboard, use the alpha-numeric keyboard to
enter letters. Use the alpha-numeric keyboard key to switch between the numeric and alphabetic
keyboard. When in alphabetic mode, the LED corresponding to the key remains lit up.
Depending on your deskphone, you can program:
• Softkeys of the Perso page.
• Keys/softkeys of the add-on module.
• F1 and F2 keys.
• Programmable keys with LED and paper.
Led behavior may differ depending on the system configuration. For more information, contact
your installer or administrator.
If the key is not programmed yet:
• Select the key to program.
• Enter your password (if required) and apply.
• Use one of the following:
o Speed dial To program a number.
o Services To program a function.
If the key is already programmed:
• Use one of the following:
o
o Reach the 'Menu' page Settings Phone Key program Prog perso page
• Select the key to program.
• Enter your password (if required) and apply.
• Use one of the following:
o Speed dial To program a number.
o Services To program a function.
To program a number
• Speed dial
• Enter the number.
• Apply
• For a softkey (perso page or add-on), enter the name of the key.
• Apply
•
To program a function
• Services Follow information displayed on the screen.
•
7.10.1 Other possibilities
• Modify Modify contents of entry displayed.
• Erase Delete
To Next Page
Loading...
