Return into your group:
• Reach the 'Menu' page.
• Settings My services Consultation (Consult) Additional services Go into hunting group
• Enter your group number.
This feature is accessible via a programmed key: Into group (In group) (by default).
Belonging to a group does not affect the management of direct calls. A specific telephone within a group
can always be called by using its own number.
4.5 Calling an internal contact on his/her pager
The number called does not answer and you know that the person called has a pager:
• Dial the destination number.
• Paging
• Dial the destination number Paging in progress is displayed.
Your contact can answer from any telephone in the system.
4.6 Answering a call on your pager
A call on your pager can be answered from any telephone within the system.
• Your pager beeps.
• Reach the 'Menu' page.
• Settings My services Consultation (Consult) Paging services Paging answer
• Your extension number.
This feature is accessible via a programmed key: Pagng answ (PagAnsw) (by default).
4.7 Calling a contact on his/her loudspeaker
Your internal contact does not answer. If authorised, you can remotely activate her/his phone:
• Your contact does not reply.
• LS announce (Announce) You are connected to the loudspeaker on your contact's phone (if
he/she has the hands-free function).
4.8 Broadcasting a message on the loudspeakers of a station group
A message not requiring an answer can be broadcasted on the loudspeakers within your broadcast
group:
• Off hook.
• Number of broadcast group Speak, you have 20 seconds.
• Hang up.
The message will only be broadcast on terminals not in use and which have a loudspeaker.
To Next Page
Loading...
