1.14 ALE Wideband Bluetooth® Handset
The Bluetooth® Wireless handset is only available with compatible Bluetooth® deskphones.
ALE Wideband Bluetooth® Handset
LED (Front and back of the device)
• Blue flashing: Normal operation.
• Blue steady: Handset charging.
• Red slow flashing: Battery charge low. If voice prompts are enabled, you hear: “Battery low ”.
• Red fast flashing: Handset outside coverage zone. If voice prompts are enabled, you hear: “Out
of Range”.
• Red steady: handset not paired.
Line key
• Switch the device on/off: Press and hold to switch the device on/off. If voice prompts are
enabled, you hear: “Power On / Power Off”.
• Off-hook/On-hook: press this key to take or terminate a call.
• Voice prompts (In idle state): Double press to enable the voice prompt.
Volume/Mute key
• Volume (During conversation): Short successive presses to change the handset volume level
(3 levels).
• Mute (During conversation): Press and hold to ensure your correspondent no longer hears you.
• Voice prompts (In idle state): Double press to disable the voice prompt.
• Location of the battery.
If the Bluetooth® handset is on its base, you do not need to press the Off-hook/On-hook key to take or
terminate the call. Just off-hook/on-hook the Bluetooth® handset
The battery recharges when the Bluetooth® handset is on its base. The battery autonomy is more than
10 hours in conversation, and 50 hours in idle state. Charge the battery for about 6 hours before initial
use.
If you are not going use the handset for a long time, we recommended that you switch off the device by
using the switch at the top of the battery compartment.
To Next Page
Loading...
