7.29.3 PIN code
The PIN code is composed of 4 digits. You can access the VPN configuration by entering the PIN code
or the administrator password if defined by the system. Depending on the VPN configuration, the PIN
code is requested when you boot your deskphone. We recommend you enable this option for security
reasons and if you need your phone in remote and in business place (see Reconnect your deskphone in
your business place).
If the PIN code is incorrect 5 times in succession, the PIN code and VPN parameters will be erased.
If no administrator password is defined by the system, the PIN code is required to access VPN
configuration.
7.29.4 Reset your PIN code
• Restart the deskphone (unplug and plug in the power jack if you are using an external power
adapter or the Ethernet connector – LAN).
• When the deskphone displays the 'Step 2' during the boot, repeatedly press the '*' and '#' keys in
succession until a menu is displayed.
• VPN (Scroll down the menu).
• VPN Pincod
• Enter your PIN code.
• Validate.
• Set new Pincode: enter the new PIN Code.
• Select this icon to save parameters.
• The VPN configuration is saved and the main menu is displayed.
• select this icon to exit the configuration menu. The deskphone restarts.
• Enter the PIN code if you have selected the option (Request Pin on Boot).
7.29.5 Reconnect your deskphone in your business place
You phone is already configured for teleworking.
• Connect your deskphone to the network (and plug in the power jack if you are using an external
power adapter).
• If the option to enter PIN code when you boot your deskphone is enabled in the VPN
configuration (Request Pin on Boot):
o The PIN code is requested.
o Select this icon to go back.
o The phone restarts in normal mode. The VPN is temporary disabled until the next reboot.
• If the option is not enabled:
o When the deskphone displays the 'Step 2' during the boot, repeatedly press the '*' and '#'
keys in succession until a menu is displayed.
o VPN VPN Config
o Enter your PIN code.
o Validate.
o Enable VPN: Disable the teleworker.
o Select this icon to save parameters.
o The VPN configuration is saved and the main menu is displayed.
o select this icon to exit the configuration menu.
o The phone restarts in normal mode.
To Next Page
Loading...
