12.2.7 Use the 8125 Audioffice with your mobile
You can connect your mobile to the conference module by using the Lightening, 30 pin and micro-USB
adapters. A Bluetooth® connection is needed to place and receive your mobile calls on the Alcatel-
Lucent 8125 Audioffice. To receive and end a voip call, use your Alcatel Lucent softphone application.
Insert the cable suitable to your
smartphone into the matching cable
adapter.
Place the cable in the cable hole.
Slide the cord into place through the
interstices under the base.
Slide the cord into place through the
interstices under the base.
Plug the USB connector to the left
USB port at the rear of the device.
Insert the suitable adapter to your
smartphone, or none if you use a
case and your device doesn’t fit.
To Next Page
Loading...
