24/91
This feature is useful when you have no connection to a communication server (no
registration, network problems, etc.). Not all the features are available should this occur and
the phone's status should be displayed on the screen. This feature can be deactivated by your
administrator.
Use the alpha-numeric keyboard key to switch between the numeric and alphabetic keyboard.
The format of the entered IP address must be x.x.x.x or x*x*x*x where x is a decimal
value between 0 and 255.
3.2.4 Calling by name
You can call a contact by his/her name using the search feature in the company directory. This
feature depends on the system configuration. If necessary, contact your administrator.
You can unhook the handset or the headset to make a call with the handset or the headset
otherwise you make a call in hands-free mode.
Open the dialer.
abc
Switch to the alphabetical keyboard.
Enter the first letters of your contact's name.
The search runs as soon as you enter a character (predictive search).
The matching names are displayed.
Select the contact to call.
Use one of the following to send the call:
Press the 'take the call' key. Make the call with the active device:
handset if unhooked, headset if connected, otherwise in hands-free
mode.
Press the OK key to start the call. Make the call with the active device:
handset if unhooked, headset if connected, otherwise in hands-free
mode.
Call
Press the call key to start the call. Make the call with the active device:
handset if unhooked, headset if connected, otherwise in hands-free
mode.
# or
*
If defined in the phone settings, you can use these keys to initiate the
call (
Menu → Features → Key As Send)
.
3.2.5 Call from call log
You can call back a contact from the call log.
You can unhook the handset or the headset to make a call with the handset or the headset
otherwise you make a call in hands-free mode.
To Next Page
Loading...
Need help?
General
