Alcatel-Lucent M7 - Page 34

34/91
Using your telephone
8AL90382ENAA ed03
Basic Setting Use up-down and 'ok' navigation keys to select: Basic Setting .
Bluetooth
Use up-down and 'ok' navigation keys to select: Bluetooth .
Scan
Press the softkey under the following label: Scan.
Scanning starts.
Searching for Bluetooth
®
equipment. Wait for the detected equipment
type and address to be displayed.
Connect Add the device by pressing on the associated key: Connect .
Enter the PIN code of the device if necessary.
This icon is displayed on your desk phone: .
Depending on your mobile phone, you have to accept to share contacts either during pairing
or in connection options. Consult the user manual of your mobile phone.
The contacts are automatically imported into the directory:
External Directory .
Contacts are kept until another mobile is connected to the M7 or if you delete all imported
contacts manually.
If necessary, you can manually synchronize contacts:
The phone is in idle state.
Menu Press the Menu soft key to access the Main Menu.
Basic Setting Use up-down and 'ok' navigation keys to select: Directory.
Bluetooth Use up-down and 'ok' navigation keys to select: Bluetooth.
Paired Bluetooth
Device
Use up-down and 'ok' navigation keys to select: Paired Bluetooth Device.
The paired device is listed.
Select your connected mobile phone.
More → Enter >
Sync BT Contacts
Use up-down and 'ok' navigation keys to select: Sync BT Contacts.
Synchronize the contacts.