4.7 Alcatel-Lucent IP Touch 4018 phone Extended Edition
4.7.1 Commissioning
4.7.1.1 Overview
This module presents all the actions required for commissioning the Alcatel-Lucent IP Touch 4018
phone Extended Edition set.
The following figure illustrates the connectors on the base of the Alcatel-Lucent IP Touch 4018 phone
Extended Edition sets.
PC connector LAN connector
Power
connector
External ringer
connector
Handset connector
Figure 4.8: Alcatel-Lucent IP Touch 4018 phone Extended Edition connectors
4.7.1.2 Commissioning the set
This section describes how to:
• Connect the set
• Initialize the set
• Program keys
4.7.1.2.1 Prerequisites
None.
4.7.1.2.2 Connecting the sets
This section describes how to:
• Connect an IP Touch set to the LAN (Local Area Network)
• Connect the power supply
4.7.1.2.2.1 Prerequisites
None.
Chapter
4
Installation and Cabling
3EH21123USAA - Ed. 01 - April 2017 - Installation Manual 101/207
To Next Page
Loading...
Need help?
General
