RED flashing Trying to connect to the network
Green flashing Network status display and showing network activity
Off IP-DECT base station operational
4.15 PIMphony
4.15.1 Overview
PIMphony is a personal productivity tool that connects your phone terminal (dedicated, analog or
DECT wireless set) with your computer, providing enhanced usage of your telephone.
PIMphony IP is an IP phone that provides the same level of features as PIMphony associated with an
actual terminal. PIMphony IP is based on Voice over IP technology (VoIP). No physical terminal is
required.
PIMphony also provides tight integration with the most popular PIMs (Personal Information Managers)
on the market, enabling them for Computer Telephony.
Note:
For information and details concerning PIMphony installation, refer to the Installation Manual section in the
PIMphony Online Help.
The PIMphony Online Help is available:
• from the PIMphony CD-Rom and the Documentation CD-Rom: open the aochelp.chm file to access the Online
Help
• from the PIMphony application : once it is installed on your PC, press F1 to open the Online Help
4.15.2 Additional Information
4.15.2.1 Hardware aspects
table 4.12: PC Requirements
Version Hardware Requirements
PIMphony 6.8 PII 300 Mhz+ 128MB Ram + 2 GB HD (140 MB free
space to install PIMphony) + SVGA (1024x768) +
Ethernet Board + Keyboard + Mouse
Sound card for PIMphony IP
USB port or serial port for use of a headset with PIM-
phony IP
Chapter
4
Installation and Cabling
3EH21123USAA - Ed. 01 - April 2017 - Installation Manual 136/207
To Next Page
Loading...
