6.1.12 User information language
Choice
Choice of language used on all the stations in the installation (display and spoken
help)
6.1.13 Basic metering unit cost
The value of the basic metering unit is introduced for calculating the cost of external calls. The cost (not
the duration) and the changes in the charge meters during calls are displayed. The value entered can
contain 5 figures (0-2 decimal places) in the chosen monetary unit. This service is dependent on the
subscription made with the operator.
Note:
Changing by duration required an external application.
6.1.14 TIME & DATE
The current date and time must be entered. Enter the date in the format DD/MM/YYYY.
Enter the time in the format HH:MM.
Chapter
6
Start-Up
3EH21123USAA - Ed. 01 - April 2017 - Installation Manual 180/207
To Next Page
Loading...
Need help?
General
