Alcatel-Lucent OXO Connect Small - Numbering Plan; Terminal DDI Numbers

The screen displays a default end IP address (192.168.092.009)
The following softkey is available:
• Clear: Clear the EndIP@ field
Other fixed keys of the set:
• Back: Return to the previous menu (Configuration of the OXO Connect DHCP server for Alcatel-
Lucent OmniSwitch on page 174)
• Exit: Return to home page
• Left and right keys of the 4-way navigator: moving cursor in text
• OK: Validation of the Start IP address field
• Backspace: Deletion of one or more characters
6.1.5 Numbering plan
Choice
: Used to choose one of the pre-programmed numbering plans: (2 to 4 digits,
national or with *).
Any modification of the numbering plan causes the deletion of any existing DDI numbers.
6.1.6 Terminal DDI numbers
This function is used to define the DDI numbers (Direct Dialing Inwards) of all the terminals of a
Business system and the Administrative terminals (dedicated terminals) of a Hotel system. Only one
DDI number can be attributed to each internal directory number.
Choice
Access to the definition of terminal DDI numbers; displaying the first internal
directory number/DDI number.
Chapter
6
Start-Up
3EH21123USAA - Ed. 01 - April 2017 - Installation Manual 175/207