Safety information
15
− Connect the appliance to a drinking water pipe up to 60°C.
− If the appliance is to replace an old appliance, never use old
hose sets for the connection. Connect the appliance with the
hose sets provided or new ones.
− Only connect the dishwasher to a fully vented pipe network.
− Do not shorten or damage the supply hose. There is a risk of
short-circuiting due to live parts.
Important information
CAUTION!
Risk of injury!
There is a risk of scalding. The touchable surfaces on the
appliance may become hot during operation.
− Allow the appliance to cool down before emptying.
− Exclusively use the accessories supplied or accessories which
are described as suitable in these instructions.
− Only use dishwasher-safe dishes. Look for markings such
as “Dishwasher safe” or “Suitable for dishwashers” when
purchasing dishes.
− Close the appliance door again after a wash cycle has fi nished,
as an open door could pose a trip hazard.
A pressure reducing valve might have to be installed at higher
water pressures.
To Next Page
Loading...
Need help?
General
