Error messages
38
Unsatisfactory drying results
The dishes are not
dried.
The dishes were not
arranged correctly.
Arrange the dishes as
described in chapter “Arranging
the dishes and cutlery”.
Not enough rinse aid Use more rinse aid./Replenish
the rinse aid compartment.
The dishes were removed
too soon.
Do not remove the dishes
immediately after the program
is fi nished.
Open the door slightly so that
vapour can escape.
Remove the dishes while they
are still slightly warm.
Incorrect program
selected
The temperature is lower
in programs with a short
runtime. Select a program with
a longer runtime and higher
temperature.
Error messages
Error message Meaning Possible reason/remedy
E1 Water cannot be
pumped in.
Open the water inlet or increase the
water pressure if the water inlet is not
fully open.
E4 The appliance
overfl ows/leaks.
Make sure that the door is closed
correctly and that the water inlet and
outlet are connected correctly.
Turn off the water supply.
If water is on the appliance base due
to overfi lling, remove the water before
restarting the dishwasher.
Rinse aid empty Replenish rinse aid.
Regeneration salt
container empty
Replenish regeneration salt container
To Next Page
Loading...
