Preparations for use
21
− If you do not press any button for about 6 seconds, the setting will be adopted
and setting mode quit.
Adding rinse aid
Rinse aid prevents water droplets and deposits from forming on the dishes in the last
part of the wash program. Rinse aid also ensures that the dishes dry better and faster.
The appliance can operate with liquid rinse aid. The container is located next to the
detergent container on the inside of the door. The rinse aid container has a capacity of
approx. 160 ml.
NOTICE!
Material damage!
Damage to the appliance is possible if incorrect rinse aid additive
is used.
− Only fi ll with pure rinse aid for dishwashers. Rinse aids with
washing or other additives are not suitable.
− Open the appliance door.
− Twist the lid of the rinse aid anticlockwise onto the left arrow and remove the lid.
− Add rinse aid as far as the “MAX” marking. Make sure the container does not
overfl ow.
− Place the lid with the arrow tip onto the left arrow again and twist it clockwise
onto the right arrow.
Replenishing rinse aid
Rinse aid must be replenished if the rinse aid display
2
lights up. Then fi ll with rinse
aid as described above.
To check the level of the rinse aid from time to time, the rinse aid display is located to
the left of the rinse aid container opening. The display changes, depending on the
To Next Page
Loading...
Need help?
General
