Installation
18
Connecting the water outlet
φ 40mm
A
B
You can connect the outlet hose in different ways:
• connect the hose to a special connection on the outlet pipe
A
or
• introduce the hose into an outlet pipe
B
.
NOTICE!
Material damage!
Material damage is possible in the event of water leakage.
− Make sure that the outlet hose is always introduced into an
outlet at a maximum height of 100 cm, as otherwise the pump
capacity would be impaired.
− The water must always be able to drain freely:
− Make sure that the outlet hose is not kinked or twisted.
− The end of the hose must not be in the water pumped off.
− Do not use a hose that is longer than four metres in length.
To Next Page
Loading...
Need help?
General
