ALDI AMBIANO - Unsatisfactory wash results

Troubleshooting
37
General faults
No program was started
after adding salt.
Always start the Quick program
without dishes after adding salt.
Noise
Knocking/rattling
noise in the appliance.
The spray arm knocks
against the dishes and/or
against an item in the dish
rack or one of the dishes is
loose in the rack.
Stop the program and
rearrange the dishes.
Unsatisfactory wash results
The dishes are not
clean.
The dishes were not
arranged correctly.
See section “Arranging the
dishes and cutlery” on page
24.
The selected program was
not suitable.
Select a more intensive program
(see chapter “Starting the wash
program” on page 28.
Not enough detergent
was used.
Use more or another detergent.
Individual dishes are
blocking the path of the
spray arm.
Rearrange the dishes so that
the spray arm can move freely.
The fi lter is not inserted or
is fi tted incorrectly.
Clean and/or insert the fi lter
correctly. Also clean the spray
arm
(see ““Selecting the program”
on page 28”).
Glasses are spotted. Combination of soft water
and too much detergent
Use less detergent if you have
soft water and use the shortest
program to wash glasses
correctly.
Black or grey spots on
the dishes
Aluminium cutlery/
accessories have come
into contact with the
plates.
Use a mild detergent to remove
the spots.
The detergent
compartment still
contains detergent
after the wash cycle.
The lid of the detergent
compartment was
blocked by dishes.
Rearrange the dishes.