38
Operation
Switching the table saw on and off
Risk of injury!
If the table saw has been assembled incorrectly, this could lead to
serious injuries.
• Assemble the table saw correctly and completely before using for
the first time.
• Before you switch on the table saw, make sure that the saw blade
is correctly fitted and that the equipment’s moving parts run
smoothly.
• Press the green operating switch I (
43
) to switch on. The motor
starts. Wait for the saw blade (
31
) to reach its maximum speed
of rotation before starting sawing.
• To switch off the table saw, press the red operating switch 0
(
43
).
Risk of injury!
Caution: The saw blade continues to run for quite a while. Do not
leave the table saw until the saw blade has come to complete
standstill.
Sawing
Risk of injury!
There is a risk of serious injuries if the table saw is handled
improperly.
• Do not position yourself head-on in front of the table saw when
performing longitudinal cuts, but position yourself at an angle to
the course of the cut.
Layout_F_TS_2000_1_UK_SPK7.indd 38Layout_F_TS_2000_1_UK_SPK7.indd 38 23.06.2020 14:29:3723.06.2020 14:29:37
To Next Page
Loading...
Need help?
General
