Alienware AW3423DW - Page 70

70 | Using AlienFX application
Rainbow Cycle Description
This effect makes the lights change in the sequence
of rainbow colors.
You can drag the B
RIGHTNESS slider to change
the intensity of the color from strong to light.
You can drag the TE
MPO slider to adjust the
transition speed.
NOTE: The option is available only when
you
select All Zones to make lighting adjustments.
Blink Description
This effect makes the lights blink rapidly with RGB
colors.
You can drag the B
RIGHTNESS slider to change
the intensity of the color from strong to light.
You can drag the TE
MPO slider to adjust the
transition speed.
NOTE: The option is available only when
you
select All Zones to make lighting adjustments.
Comet Description
Select to deliver a dynamic comet light effect.
To make the adjustments:
1. Pi
ck a preferred color from the color palette
or the list of PRESET COLORS. The selected
color and its RGB color codes will be
displayed on the right field.
NOTE: To change the color, use the up and
down arrow buttons beside the R/G/B boxes
to edit the color codes.
2. To add the selected color to the list of YOUR
COLORS for quick access in the future, click
. At most 12 colors can be added to the list.
NOTE: To remove an existing color chip from
the list, right-click on it.
3. Drag the BRIGHTNESS slider to adjust the
brightness of the color.
4. Drag the TEMPO slider to adjust the pulsing
speed.