EasyManuals Logo

ALLEN & HEATH CQ-20B User Manual

ALLEN & HEATH CQ-20B
136 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #74 background imageLoading...
Page #74 background image
74
User Guide V1.1.0 Issue 1
Quick Channel and Complete Channel differences
A Quick Channel shows the Quick Channel icon for the Quick Channel being used.
A Complete Channel is shown as separate processing ‘blocks’ with signal path
running from top to bottom, so for example, the signal will pass through the gate
before going through the PEQ. Each of these blocks displays useful information
such as whether the gate is open or whether compression is being applied. If a
processing block is switched Out, it will show without colour.
Sends
At the bottom of each input channel is the SENDS section which shows the send
level to the Main LR with the meter and fader (as in the bank tabs at the top). It also
displays send levels to FX units and Outputs 1-6.
Navigation
Touch a channel to select it and show its main fader on the right-hand side.
Selection of a channel is followed through CONFIG, PROCESSING and FADER screens.
Touch any processing or the sends block of a selected channel to view processing
in detail and make adjustments.
When viewing processing in more detail, the channel processing blocks will move to
the right, in place of the channel fader in bank view. It is then possible to navigate
quickly by selecting different processing blocks on the right and selecting different
channels at the top.
Touching an FX unit which has been inserted on a channel will switch to the FX
screen to make any adjustments.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ALLEN & HEATH CQ-20B and is the answer not in the manual?

ALLEN & HEATH CQ-20B Specifications

General IconGeneral
Frequency range20 - 20000 Hz
Channels quantity24 channels
Supported sample rates96 kHz
Digital sound processing- bit
Nominal input level17 dBu
Output impedance75 Ω
Total Harmonic Distortion (THD)0.002 %
Built-in display-
Card reader integratedYes
Compatible memory cardsSD, SDHC
Maximum memory card size32 GB
Bluetooth version4.1
XLR out8
RJ-45 ports quantity1
USB 2.0 ports quantity2
Number of microphone inputs20
Rack capacity19U
USB connector typeUSB Type-A, USB Type-B
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (typical)- W
Weight and Dimensions IconWeight and Dimensions
Depth154 mm
Width372 mm
Height134 mm
Weight2600 g
Package typeBox
Package depth260 mm
Package width450 mm
Package height250 mm
Package weight3300 g

Related product manuals