iLive Fixed Format Getting Started Guide 3 AP7141 iss.6b
IMPORTANT - Read these instructions before starting:
Safety instructions
Before starting, read the Important Safety Instructions printed on the sheet supplied with the
equipment. For your own safety and that of the operator, technical crew and performers, follow
all instructions and heed all warnings printed on the sheet and on the equipment panels.
Software licence agreement
By using this Allen & Heath product and the software within it, you agree to be bound by the
terms of the relevant End User Licence Agreement (EULA), a copy of which can be found on
the Allen & Heath website in the product's pages. You agree to be bound by the terms of the
EULA by installing, copying, or otherwise using the software.
General precautions
Damage: To prevent damage to the controls and cosmetics, avoid placing heavy
objects on the control surface, obstructing movement of the motorised faders, scratching
the surface or touch screen with sharp objects, or rough handling and vibration.
Contamination: Protect the equipment from damage through liquid or dust
contamination. Avoid dust or small objects getting into the fader slots. Cover the mixer
when it is not being used for a long period.
Cold: Computer and touch screen technology can be affected by extreme cold. If the
equipment has been stored in sub-zero temperatures allow time for it to reach normal
operating temperature before use at the venue. Recommended operating temperature
range for iLive is 5 to 35 degrees Celsius.
Heat: Avoid using the equipment in extreme heat and direct sunlight. iLive-T and iLive-R
Surfaces feature a composite front panel, to which exposure to temperatures above
50ºC, with ambient temperature of 35ºC, may cause temporary change in appearance.
Continued exposure to temperatures above 50ºC may cause permanent damage to the
composite panel.
Ventilation: Make sure the control surface and rack ventilation slots are not obstructed
and that there is adequate air movement around the equipment.
Transport: Use touring grade, purpose designed flight cases with adequate foam lining
and internal support for protection.
Cleaning: Do not use chemicals, abrasives or solvents. Clean the control surface with a
soft brush and dry lint-free cloth.
Servicing: It is recommended that servicing is carried out only by an authorised Allen &
Heath agent. Contact details for your local distributor can be found on the Allen & Heath
web site. Allen & Heath do not accept liability for damage caused by maintenance,
repair or modification by unauthorised personnel.
To Next Page
Loading...
Need help?
General
