DEEP Preamp –
Preamps in the SQ itself and those in Remote Audio Units are accurate and
transparent, with fast transients and low THD. However, there are some situations
where alternative characteristics may be desirable. Using a DEEP preamp model
allows you to add these characteristics, with complete control, and none of the
associated limitations or reliability concerns of esoteric equipment.
• When in the channel ‘Preamp’ screen, press the ‘Library’ key to show the list of
preamp models.
• Select a preamp preset, then press the ‘Recall’ button to load it.
• Touch ‘On/Off’ to switch the preamp model on or off.
• Touch any on-screen parameter and adjust using the touchscreen rotary.