Allen-Bradley 1747-ASB - Page 8

Publication 1747-UM006B-EN-P - June 2003
Table of Contents iii
Chapter 5
Installation and Wiring
European Union Direct Compliance. . . . . . . . . . . . . . . . . . 5-1
EMC Directive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1
Installing the1747-ASB Module . . . . . . . . . . . . . . . . . . . . . 5-1
Link Wiring. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2
Correct Link Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3
Incorrect Link Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3
Link Termination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4
Wiring a Processor Restart Lockout Switch . . . . . . . . . . . . . 5-5
I/O Module Addressing Labels. . . . . . . . . . . . . . . . . . . . . . 5-6
Using a PLC as a Master . . . . . . . . . . . . . . . . . . . . . . . . 5-6
Using an SLC as a Master . . . . . . . . . . . . . . . . . . . . . . . 5-6
Octal Label Kit Installation. . . . . . . . . . . . . . . . . . . . . . . . . 5-7
Applying the Octal Filter Label . . . . . . . . . . . . . . . . . . . 5-7
Applying the Octal Door Label . . . . . . . . . . . . . . . . . . . 5-7
Octal Kit and I/O Module Information . . . . . . . . . . . . . 5-8
Chapter 6
Start-Up and Operation
System Start-Up. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1
Powerup and Initialization Sequences . . . . . . . . . . . . . . . . 6-1
Save Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2
Check Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2
Normal Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3
Communication Exception . . . . . . . . . . . . . . . . . . . . . . . . 6-3
Inhibit Condition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-4
Remote Expansion Chassis Power Loss . . . . . . . . . . . . . . . 6-6
Invalid RIO Link Transfers. . . . . . . . . . . . . . . . . . . . . . . . . 6-6
RIO Discrete or Block Transfers To Empty or
Nonexistent Chassis Slots . . . . . . . . . . . . . . . . . . . . . . 6-6
RIO Discrete Transfers To Block Transfer Chassis Slots . 6-7
RIO Block Transfers To Discrete Chassis Slots. . . . . . . . 6-7
Invalid Length RIO Block Transfers. . . . . . . . . . . . . . . . 6-7
Testing the 1747-ASB Module. . . . . . . . . . . . . . . . . . . . . . 6-7
I/O Module Insertion into a Slot . . . . . . . . . . . . . . . . . . 6-9
I/O Module Removal from a Scanned Slot. . . . . . . . . . . 6-9
I/O Module Removal from an Unscanned Slot. . . . . . . . 6-10
Chapter 7
Troubleshooting
Troubleshooting Introduction . . . . . . . . . . . . . . . . . . . . . . 7-1
Contacting Rockwell Automation . . . . . . . . . . . . . . . . . . . . 7-2
Status Operating Codes for Normal Operating Conditions . . 7-2
Error Codes for Error Conditions . . . . . . . . . . . . . . . . . . . . 7-3
DIP Switch Configuration Mismatch Fault Codes - Codes
1 and 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-5
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com