Rockwell Automation Publication 2100-IN012G-EN-P - August 2016 125
Appendix B
Auxiliary Contact Adapters
Use these instructions to install an external auxiliary contact adapter in
CENTERLINE® 2100 Series Z and later units with circuit breakers
(Bulletin 140G and 140MG).
The auxiliary contact kits are to be used with the following auxiliary contacts:
catalog numbers 800F-X10, 800F-X01, 800F-X20D, 800F-X11D, and
800F-X02D.
Install External Auxiliary
Contact Adapter on G, H, and
J Frame Horizontal Units
Follow these instructions for installing auxiliary contacts on G, H, and J frame
horizontal units.
These kits contain parts to install external auxiliary contacts in units that are
the following types:
•Units with horizontal operating handles
• Have one of the following circuit breakers: Bulletin 140G, 140MG
• Bulletin 2100 Series Z and later
Required Tools
You need a screwdriver, a Phillips screwdriver, and a hexalobular T-15
screwdriver to complete the installation.
ATTENTION: De-energize all of the power sources to the motor control
center before installing the auxiliary contact adapter. Failure to de-energize
all of the power sources can result in severe injury or death.
ATTENTION: De-energize all of the power sources before installing auxiliary
contact. Failure to de-energize all of the power sources can result in severe
injury or death.
To Next Page
Loading...
