72 Rockwell Automation Publication 2100-IN012G-EN-P - August 2016
Chapter 6 Operator Handle and Unit Interlock
Figure 31 - Defeater Lever for Horizontal Operating Handle
Locking Provisions
Refer to the following sections for locking provisions.
Lock Vertical Operating Handles in the OFF/O Position
To lock the small, medium, and large operator handle in the OFF/O position,
put the shackle of the lock through the opening in the operator handle
assembly. The opening can accommodate up to three padlocks.
Figure 32 - Locking Vertical Handles in OFF/O Position
ATTENTION: When working on or near energized electrical equipment,
follow established electrical safety-related work practices. Refer to NFPA 70E
Standard for Electrical Safety in the Workplace.
Small and Medium Vertical Handle Large Handle
To Next Page
Loading...
