Allen-Bradley CENTERLINE 2100 - Page 29

Rockwell Automation Publication 2100-IN012G-EN-P - August 2016 29
Installation Procedures Chapter 2
Figure 13 - Mounting Dimensions for 30 in. and 40 in. Deep Back-to-Back Section
A
B
D
D
Rear
Front
C
Standard Ground Bus
Rear
C
7.38 in. (187 mm)
Front
7.38 in. (187 mm)
0.25 in. (6 mm)
0.25 in. (6 mm)
1.69 in. (43 mm)
3.19 in. (81 mm)
(4) Mounting Slots
0.56 in. x 1.13 in. in Slots
(14 mm x 29 mm) Slots
Dimensions,
approx.
20 in. Deep 40 in. Deep
20 in. Wide
in. (mm)
25 in. Wide
in. (mm)
30 in. Wide
in. (mm)
35 in. Wide
in. (mm)
20 in. Wide
in. (mm)
25 in. Wide
in. (mm)
30 in. Wide
in. (mm)
35 in. Wide
in. (mm)
A 20.00 (508) 25.00 (635) 30.00 (762) 35.00 (889) 20.00 (508) 25.00 (635) 30.00 (762) 35.00 (889)
B 30.00 (762) 30.00 (762) 30.00 (762) 30.00 (762) 40.00 (1016) 40.00 (1016) 40.00 (1016) 40.00 (1016)
C 11.56 (294) 11.56 (294) 11.56 (294) 11.56 (294) 16.56 (421) 16.56 (421) 16.56 (421) 16.56 (421)
D 10.00 (254) 12.50 (318) 15.00 (381) 17.50 (445) 10.00 (254) 12.50 (318) 15.00 (381) 17.50 (445)