Rockwell Automation Publication DNET-IN001B-EN-P - January 2012 33
Install a 1769 DeviceNet Communication Module Chapter 2
Set the Node Address of a 1769-SDN Module
You can use the following options to set the node address of DeviceNet devices:
• Set the Node Address via Software
on page 33
• Set the Node Address via the DeviceNet Node Commissioning Tool on
page 34
Set the Node Address via Software
Complete the following steps to set a device’s node address in your network
configuration file. This example uses an AC drive.
1. Start RSNetWorx for DeviceNet software and double-click the device.
2. Enter the DeviceNet address for the device.
3. Click OK to close the configuration window.
To Next Page
Loading...
