Rockwell Automation Publication DNET-IN001B-EN-P - January 2012 39
Chapter
3
Configure a Workstation to Operate on a
DeviceNet Network
You can connect a computer to the network before or after connecting devices to
the network. You can also connect a computer to the network before or after
configuring the network offline.
You must connect a computer to the network before configuring the network
online.
After you connect a computer to the system and configure a driver in RSLinx
Classic software, you can complete these tasks:
• Configure the devices on the network.
• Configure network parameters.
• Upload, download, monitor, and program projects for Logix5000
controllers.
Some networks let you bridge to other networks in your system. This lets you
connect to one network and access devices or controllers on other networks.
Topic Page
Connect a Computer to the DeviceNet Network 40
Configure a Driver for a Network 41
To Next Page
Loading...
