Rockwell Automation Publication CC-QS038A-EN-P - August 2015 11
Chapter 1
Guardmaster 440C-CR30 Configurable Safety Relay Setup
This chapter provides information for how to configure the hardware for the 440C-CR30 safety relay.
Before You Begin
• Review the Getting Started Connected Components Accelerator Toolkit with System Design Assistant Quick Start,
publication CC-QS035
.
• Apply power to your 440C-CR30 safety relay.
What You Need
• Personal computer with an available USB port
• 440C-CR30-22BBB safety relay
• USB cable (for programming the safety relay)
• Connected Components Workbench software, version 8.00
To Next Page
Loading...
