20 Rockwell Automation Publication CC-QS038A-EN-P - August 2015
Chapter 2 System Validation
Configure the PanelView 800 Terminal Communication Settings
To modify these settings in the default Connected Components Workbench project, follow these steps.
1. To open the PanelView 800 application editor, in the Project Organizer double-click the PanelView 800 device icon.
The PanelView 800 Communication Settings pane appears in the main project window.
2. Configure the appropriate communication settings:
For CIP Serial communication, configure the settings that are shown here.
To Next Page
Loading...
