Rockwell Automation Publication CC-QS038A-EN-P - August 2015 37
System Validation Chapter 2
3. Press Minor Fault to access the fault detail.
The Minor Fault Help screen reports a Fault Bit 2. The description of this fault corresponds to the type of device
that is connected. In this example, SMF 1 is an emergency stop button (a 2-channel device). Therefore, see the
description for the 2-channel device.
4. Connect the wire at terminal 1.
5. Press and then release the emergency stop button.
6. To enable the safety relay (OUT_18 and OUT_19), activate the reset signal.
To Next Page
Loading...
